September 18, 2016
My brother and his wife will be bringing their son E to WDW for the first time in a few weeks. So of course the occasion warrants matching t-shirts.
To create this shirt I used Silhouette Studio software and cut the image with siser easy weed adhesive material. I heat pressed the material to the shirt then applied TRW foil material.
When applied to the shirt the siser adhesive material has no color (making it a challenge to weed. This is a low temp material that needs to be pressed at about 300 degrees F. It is a quick press 3-5 seconds with a hot peel.
Best apply the foil and press at the same temperature. According to the manufacture it is a 15 second press. However I did not have good coverage after 15 seconds so I put the foul back down and did an additional press. The foil is a cold peel process.
And for good measure I made the same shirt with opposite colors!!!